RGBW LED Strip 24V
  • RGBW LED Strip 24V

RGBW LED Strip 24V

VAT excluded

24V RGBW LED Strip

RGBW (quad 4 in 1 Chip) 

RGB+Cool White (6000K)/ Warm White (2700K)

60 LED's per meter, 14.4W

5 meters roll, width 12mm

LED ChipQuad colour SMD5050
ColourRGB+Warm White/ Cool White
Power14.4 W/m
Brightness1200 Lm/m
Number of LEDs per meter60
RatingAs selected
Colour Temperature (CCT)2700K/6000K
CRI (Ra)more than 80
Width of strip12mm

RGBW LED Strip Light 24V (60 LEDs/14.4 Watt per meter) RGB+Cool White/ Warm White (all in 1 chip)

New Design RGBW LED Strip With Integrated RGBW LED chips, rated at 24V.

This is brighter than the standard RGB+W strips.

The quality of this product is superior (All chips with Ra>80)

We use the latest red colour original 3M STRONG DOUBLE SIDED Sticky Tape that can also be used underwater.

Cutting length is every 6 LED's (10 CM), LED tape width is 12mm

RGBW LED Strip (4 in 1 integrated LED chip) has a power consumption of 14.4W per meter

That’s the consumption of all 4 colours together, meaning an average of 3.6W per colour per meter.

Note: Those are the average readings based on 5 meters length of strip, if the length is of strip is 1 meter the power consumption will be higher due to the reason that there is almost no voltage drop. We did a test for reference and the result is 18.48W or 0.77A (Load: 1 meter of RGBW LED Strip)

Every maximum of 5 meters RGBW LED strip is suggest to be connected with the LED controller directly using a separate 5 core cabling. 

Never connect from one 5 meters roll to another even if our RGBW LED strips are supplied with 15CM wires both at the beginning and also at the end of every roll. Up to 10m single run is only possible if supplied from both sides and the 2 x 5 cores cables to be paralleled at the controller side. 

Cabling on both sides of the RGBW LED strip roll is useful when you need to cut the roll into 2 different lenghts as an example 3+2 meters; in this case 15CM X cables are ready for both pieces of the led strip and no extra soldering will be necessary.

All our LED Strips are dimmable, please select a suitable PWM LED dimmer/controller, you cannot properly dim an LED strip in any other way!

All Our RGB and RGBW LED Strips are fully compatible with Fibaro RGBW LED Controller, Rako and generally ANY common anode LED controller available in the market today.

The price is for 5 meters waterproof 24 Volts RGBW roll , total of 300 quad RGBW (4 in 1) LED's