Our HEX100HDVGA-KIT extender set is an industry leading 4K UHD HDBaseT solution that delivers switchable HDMI and VGA inputs. The extender set also transmits Bi-directional IR, RS-232 and PoH (PoE) up to lengths of 100m over a single CAT cable.
Key Features
Extends HDMI and VGA/Audio up to a distance of 100m over single CAT cable
Auto signal sensing switches between HDMI and VGA/Audio inputs. Will display last input signal connected
Manual switching between inputs using toggle button or RS-232 control on either Transmitter or Receiver
Supports 4K UHD video up to 70m (3840 x 2160 @30Hz 4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K @60Hz 4:2:0)
Supports industry standard video resolutions from 480i-4K and most industry standard VGA resolutions (check manual for full list of supported VGA resolutions)
Supports 3D signal display
Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission
Supports bi-directional RS-232 pass through
Supports bi-directional IR from all input and output locations
Supplied with Blustream IR receiver and emitters
Supports bi-directional POH (Power over HDBaseT) to power extenders from either transmitter or receiver end
HDCP compliant
Specifications
HEX100HDVGA-TX
Audio Input Connectors: 1x Analogue Left/Right 3.5mm Stereo Jack
Video Input Connectors: 1x HDMI Type A & 1x VGA (DB-15)
Video Output Connectors: 1x HDBaseT RJ45 connector
IR Input Ports: 1x 3.5mm stereo jack
IR Output Ports: 1x 3.5mm mono jack
RS-232 Serial Port: 1x DB9, female
Mounting brackets included
HEX100HDVGA-RX
Audio Output Connectors: 2x Analogue RCA Left/Right & Coaxial digital